Round insert milling cutters are suitable for milling titanium because their leading angles can be varied as appropriate. As long as these milling cutters are equipped with special inserts and the correct cutting parameters are applied, stab....
1. Flame retardant titanium alloy debut In order to avoid titanium spark, Russia has developed high-volume BTT-1 and BTT-3 flame-retardant titanium alloys containing Cu, but they have not been industrialized due to their poor mechanical prop....
[keywords] titanium alloys, processing properties of titanium alloy products, cutting, grinding, extrusion, forging, casting process of titanium alloy parts Machinability of Titanium Alloy Cutting Parts Titanium alloy has high strength and h....
The main factor affecting the machining accuracy and surface quality of aluminum alloy thin-walled cavity parts is that they are easily deformed during processing. Solve the deformation problem of aluminum alloy thin-walled cavity parts during process....
The aluminum alloy profile is light and soft relative to the steel material, and the stamping is easily broken. And some aluminum alloy products also need subsequent surface processing, such as drawing, anodizing and so on. Aluminum profiles....
What is plasma polishing? The plasma is the fourth form of substance, which is a phenomenon of electromagnetic gas discharge. The plasma is dissolved in polishing Brine under high temperature and pressure. Under high temperature and high pre....
Guide: The bending process requires that the designed structure adhere to the bending deformation law: Minimum radius of curvature, springback, minimum side length of bending, bending process hole or process groove, hole margin, bending proc....
An alloy composed of other elements added on the basis of chromium is a refractory alloy. Compared with metallic nickel, metal chromium has a high melting point (1860 C), high specific strength (ratio of strength and density), good oxidation....
Introduction: Titanium alloy has a small modulus of elasticity. For example, the elastic modulus of TC4 is E=110 GPa, which is about half of that of steel. Therefore, the large elastic deformation of the workpiece caused by cutting force wil....