Titanium and titanium alloys are mostly welded by tungsten argon arc welding. Vacuum argon filling welding is also widely used. Under the protection and cooling of argon gas flow, the arc heat is concentrated, the current density is high, th....
Key words: welding; titanium alloy; welding wire; argon gas; argon arc welding; machining of titanium alloy parts Abstract: This paper describes the material characteristics of titanium and titanium alloys and the weldability of titanium all....
1. Titanium external cooler replaces steel external cooler The external cooler is a device for cooling the mother liquor of ammonium chloride in the crystallizer, and the former external cooler is made of carbon steel. Although the inner tub....
Soda ash is one of the most basic chemical raw materials, and it is directly related to the development of the national economy. In the soda ash production process, the gaseous medium is mostly NH3 and CO2, and the liquid medium is mostly a....
Titanium and titanium alloys are not only important structural materials for the manufacture of spacecraft such as airplanes and rockets. And it is increasingly used in mechanical engineering, marine engineering, bioengineering and chemical....
Most metal mechanical parts are machined before they are officially used in order to be put into use. This is the last step before the assembly of mechanical parts. Therefore, the quality and cost of machining have a great impact on the qual....
The machining efficiency of complex titanium alloy aerospace components and the overall performance of the workpiece. Including common products: titanium alloy complex cavity, titanium alloy deep groove processing, titanium alloy rotation, s....
Stainless steel high pressure nozzles, high pressure sector nozzles, MEG high pressure nozzles have the following product characteristics: 1, stainless steel high pressure fan-shaped nozzle, with the regulator, which can be inlaid with tungs....
The spray form of the stainless steel hollow cone nozzle is a conical hollow ring shape, and the atomization particle size is small and is not easy to block; The spray angle is generally 40 to 90 degrees, and the hollow cone nozzle has no fl....
Analysis of Milling Process Characteristics of Titanium Alloy Due to the slow heat dissipation in the milling area, it is not conducive to heat balance. During the cutting process, the heat dissipation and cooling effects are very poor, and....