The impeller of C02 turbine compressor was originally made of 35CrMoV low alloy steel. In the process of using, the blade inlet of stage 1 and 3 of impeller is corroded and eroded by C02 water mist, and can not be used after a short period o....
Soda ash is one of the most basic chemical raw materials, and it is directly related to the development of the national economy. In the soda ash production process, the gaseous medium is mostly NH3 and CO2, and the liquid medium is mostly a....
Titanium is characterized by its high corrosion resistance. Titanium has become one of the main anti-corrosion materials in chemical equipment. It is mainly used in distillation towers, reactors, pressure vessels, heat exchangers, filters, m....
Titanium tapping is the most difficult process in titanium alloy machining, especially for small threads. This difficulty is mainly manifested in the large total torque of tapping, which is about twice that of 45 steel; The tap teeth are wor....
Titanium and titanium alloys are not only important structural materials for the manufacture of spacecraft such as airplanes and rockets. And it is increasingly used in mechanical engineering, marine engineering, bioengineering and chemical....
Most metal mechanical parts are machined before they are officially used in order to be put into use. This is the last step before the assembly of mechanical parts. Therefore, the quality and cost of machining have a great impact on the qual....
The machining efficiency of complex titanium alloy aerospace components and the overall performance of the workpiece. Including common products: titanium alloy complex cavity, titanium alloy deep groove processing, titanium alloy rotation, s....
Stainless steel high pressure nozzles, high pressure sector nozzles, MEG high pressure nozzles have the following product characteristics: 1, stainless steel high pressure fan-shaped nozzle, with the regulator, which can be inlaid with tungs....
The spray form of the stainless steel hollow cone nozzle is a conical hollow ring shape, and the atomization particle size is small and is not easy to block; The spray angle is generally 40 to 90 degrees, and the hollow cone nozzle has no fl....
Analysis of Milling Process Characteristics of Titanium Alloy Due to the slow heat dissipation in the milling area, it is not conducive to heat balance. During the cutting process, the heat dissipation and cooling effects are very poor, and....