Introduction: Titanium alloy has a small modulus of elasticity. For example, the elastic modulus of TC4 is E=110 GPa, which is about half of that of steel. Therefore, the large elastic deformation of the workpiece caused by cutting force wil....
With the in-depth implementation of the magnesium alloy application development and industrialization project, enterprises have experienced many problems in actual production. Such as process and safety issues, this is because most of the do....
Superalloy is a kind of engineering material used at about 1000 C. It is widely used in aerospace, aviation and various heat treatment equipment. Since the high-temperature alloy contains many high-melting alloying elements such as Fe, Ti, C....
Front angle g0: The hardness and strength of stainless steel are not high, but its plasticity and toughness are good, and its thermal strength is high. Chips are not easy to be cut off during cutting. Under the premise of ensuring that the k....
Several ways of processing kovar alloy, Kangding Hardware personal experience tells you the pros and cons of various ways Kovar alloy processing products are mainly used for glass sintering, so Kovar alloy parts are mainly based on cavity st....
Tapping on stainless steel is much more difficult than tapping on a common steel. Frequently due to the large torque, the tap is bitten in the screw hole, collapsing or breaking, the surface of the thread is not light, the groove is grooved....
Summary: Thread processing of slender shaft and slender shaft is a common and difficult work piece in mechanical processing. Due to the poor rigidity of the slender shaft, the force generated during turning and the deformation due to heat ar....
When it comes to ultra-precision electrode processing, many people will say that it is very simple. The machine is bought well, the tool is used correctly, the material is used well, the processing technology is refined, the amount of the lo....
In electric vehicles, the weight of the power battery pack accounts for about 30% of the total vehicle mass. The lightweight of automobiles and the inexhaustible pursuit of the energy density of power battery systems all require the lightwei....
According to the different finished product standards of copper bushings can be divided into: Copper self-lubricating bushings, oil lubrication need to, graphite, copper, and other types of bushings. The raw materials for the production of c....