The motor base is the key component of the motor. The rationality of its structure and processing technology have great influence on the performance of the motor. The unsuitability of the motors broom, low-frequency electromagnetic sound, vi....
The aluminum alloy profile is light and soft relative to the steel material, and the stamping is easily broken. And some aluminum alloy products also need subsequent surface processing, such as drawing, anodizing and so on. Aluminum profiles....
What is plasma polishing? The plasma is the fourth form of substance, which is a phenomenon of electromagnetic gas discharge. The plasma is dissolved in polishing Brine under high temperature and pressure. Under high temperature and high pre....
Guide: The bending process requires that the designed structure adhere to the bending deformation law: Minimum radius of curvature, springback, minimum side length of bending, bending process hole or process groove, hole margin, bending proc....
Guide: The criteria for easy tool withdrawal in part processing and design are as follows: After finishing the processing task of a processing surface, the cutting tool can leave the area conveniently, so as to avoid collision or damage of t....
An alloy composed of other elements added on the basis of chromium is a refractory alloy. Compared with metallic nickel, metal chromium has a high melting point (1860 C), high specific strength (ratio of strength and density), good oxidation....
Introduction: Titanium alloy has a small modulus of elasticity. For example, the elastic modulus of TC4 is E=110 GPa, which is about half of that of steel. Therefore, the large elastic deformation of the workpiece caused by cutting force wil....
With the in-depth implementation of the magnesium alloy application development and industrialization project, enterprises have experienced many problems in actual production. Such as process and safety issues, this is because most of the do....
Superalloy is a kind of engineering material used at about 1000 C. It is widely used in aerospace, aviation and various heat treatment equipment. Since the high-temperature alloy contains many high-melting alloying elements such as Fe, Ti, C....
Front angle g0: The hardness and strength of stainless steel are not high, but its plasticity and toughness are good, and its thermal strength is high. Chips are not easy to be cut off during cutting. Under the premise of ensuring that the k....