Industry-news

• 

  Haeufig verwendete Techniken und Vorsichtsmassnahmen fuer bearbeitete Teile

  In mechanical parts, what are the technical requirements that need to be observed? Only by complying with these technical requirements can the finished products of machining be more standardized and reasonable. The specific technical requir....

  TAG: CNC machining Lathe processing Turning Milling machining Shaft machining Material Metal Products Manufacturer Casting Stainless steel processing Rapid prototype China Rapid prototype 

  Read more

• 

  The Process of Automatic Tool Change in NC Machining Center

  A light gantry machining center machine tool automatic tool change process: 1. Lightweight Gantry Machining Center Machine Overview The light-duty gantry machine is a table-moving, beam-fixed gantry machine with or without a tool magazine. T....

  TAG: CNC machining Lathe processing Turning Milling machining Material Metal Products Manufacturer Casting Stainless steel processing Rapid prototype Aluminum products 

  Read more

• 

  Machining Technology of Precision Stainless Steel Nozzle Parts

  With the rapid development of aerospace, hydraulic, communications, micro-electronics, medical equipment and other industries. The Turning-Milling composite processing of many small precision composite parts with high precision, multi-batch....

  TAG: Stainless steel processing CNC machining Lathe processing Turning Milling machining Shaft machining Bolt Fasteners Material Metal Products Manufacturer CNC equipment 

  Read more

• 

  China Precision Casting Parts Manufacturer

  Precision casting is a special casting. Parts obtained by this method generally do not need to be machined. Such as investment casting, pressure casting and so on. One of the cast materials is: aluminum, stainless steel, titanium, titanium....

  TAG: CNC machining Lathe processing Turning Milling machining Shaft machining Material Metal Products Manufacturer Casting Stainless steel processing Rapid prototype China Rapid prototype 

  Read more

• 

  Continuous Stamping Design Of Metal Shell Parts

  The shape and size of the car door glass lifter housing parts. As shown in Figure 8.2.1, The material is 08 steel plate, plate thickness 1.5mm, mass production. Stamping production, it requires the preparation of a stamping process. 8.2.1 P....

  TAG: Stainless steel processing Aluminum products Metal Products Manufacturer Material Fasteners Mold manufacturer Stamping die Metal stamping 

  Read more

• 

  The Specifications of Wire Thread Inserts and 6 Advantages

  The wire threaded sleeve is a new type of threaded fastener, which is divided into two types: ordinary steel threaded screw sleeve and locking type steel threaded screw sleeve. It is a spring-like internal and external thread concentric body....

  TAG: Lathe processing Turning Milling machining Shaft machining Bolt Screws Fasteners Material Metal Products Manufacturer Titanium Processing Industrial automation 

  Read more

• 

  China Gear Parts Machining supplier

  Gears are mechanical parts that can match each other and have teeth. Gear transmission can complete functions such as deceleration, speed increase and direction change. It is extremely versatile in mechanical transmission and in the entire....

  TAG: CNC machining Stainless steel processing NC processing Lathe processing Turning Milling machining Shaft machining Titanium Processing 

  Read more

• 

  Large Screw pitch Thread Axial Layered Cutting Machining

  Summary: An axial layered cutting Machining method for turning large screw pitch threads is proposed. Key process control variables are revealed through the study of tool contact relationships and cutting layer parameters. And discuss the influence of....

  TAG: Lathe processing Turning Milling machining Shaft machining Bolt Screws Fasteners Material Metal parts products Programming CNC equipment CNC machining CNC Prototyping Rapid prototype China Rapid prototype 

  Read more

• 

  Precision External Thread Axial Layering Machining Experiment

  The above-mentioned axial layered machining method is adopted, and the left and right thread faces are formed by cutting the left and right machining edges respectively. According to the process design method, two different finishing turning technolog....

  TAG: Lathe processing Turning Milling machining Shaft machining Bolt Screws Fasteners Material Metal parts products Programming CNC equipment CNC machining CNC Prototyping Rapid prototype China Rapid prototype 

  Read more

• 

  Processing Technology of Metal Disc Parts

  In CNC machining, whether manual or automatic programming, process analysis of the machined parts before programming, formulate the process plan, select the appropriate tool, and determine the amount of cutting. In programming, some process....

  TAG: Lathe processing Turning Milling machining Shaft machining Bolt Screws Fasteners Material Metal parts products Programming CNC equipment Casting CNC machining Metal stamping CNC Prototyping Rapid prototype 

  Read more