Industry-news

• 

  Milling of the free surface of the forming electrode

  Strategies for high-speed roughing and finishing of graphite electrodes are different. Generally rough machining should leave less allowance for finishing, so when using small diameter tools, high feeds (cutting and feed) should be used. On....

  TAG: Titanium Alloys Titanium Processing CNC machining Lathe processing Turning Milling machining Shaft machining Material Metal Products Manufacturer Stainless steel processing 

  Read more

• 

  High-speed milling of sidewalls of thin-walled structural parts

  A large number of integral thin-walled structural parts are used in the modern aviation industry. Its main structure consists of side walls and webs. Because of its simple structure, large size and large machining allowance. The relative ri....

  TAG: CNC machining Lathe processing Turning Milling machining Material Metal Products Manufacturer Casting Stainless steel processing Rapid prototype Aluminum products 

  Read more

• 

  High-speed milling of molds and precision complex parts

  In the past few years, high speed milling has been used as an alternative and complement to conventional milling or electrical discharge machining. High-speed milling firmly establishes the status of keeping pace with traditional machining....

  TAG: CNC machining Lathe processing Turning Milling machining Material Metal Products Manufacturer Casting Stainless steel processing Rapid prototype Aluminum products 

  Read more

• 

  Turning combined machining of shaft parts

  Compared with ordinary CNC lathes, the turning turret of the turning center is equipped with a power tool that can rotate the milling cutter, the drill bit and the tap. At the same time, the machine spindle also has a C-axis function that c....

  TAG: CNC machining Lathe processing Turning Milling machining Shaft machining Bolt Screws Fasteners Material Metal Products Manufacturer Casting Stainless steel processing 

  Read more

• 

  Ultrasonic vibration milling combined machining: hard and brittle materials (glass, ceramic, carbide,

  Hard and brittle materials such as glass, ceramics, and hard alloys are difficult to process by conventional methods. However, if high-frequency vibration is added during the traditional milling, drilling, and grinding processes, that is, c....

  TAG: CNC machining Lathe processing Turning Milling machining Material Metal Products Manufacturer Casting Stainless steel processing Rapid prototype Aluminum products 

  Read more

• 

  Grinding of large diameter thin-walled parts

  In the towed concrete pump truck, there is a typical large diameter thin walled part - the intermediate sleeve. The inner hole has a diameter of 202 mm, an outer diameter of 212 mm, and a wall thickness of only 5 mm. Moreover, the positiona....

  TAG: CNC machining Lathe processing Turning Milling machining Shaft machining Material Metal Products Manufacturer Casting Stainless steel processing Rapid prototype China Rapid prototype 

  Read more

• 

  Cold extrusion processing of profiled workpieces

  Definition of cold extrusion: extrusion at a temperature below the recovery temperature. For most non-ferrous metals such as aluminum, copper, titanium, and steel materials, it generally refers to extrusion at room temperature. Cold extrusi....

  TAG: CNC machining Lathe processing Turning Milling machining Shaft machining Bolt Screws Fasteners Material Metal Products Manufacturer Casting Stainless steel processing 

  Read more

• 

  Process for turning precision rollers

  The roller is the main part on the rolling mill. In the actual use process, due to a certain impact force, and the surface will be rubbed by high-speed, high-temperature red steel. The surface is required to have good wear resistance, and a....

  TAG: CNC machining Lathe processing Turning Milling machining Shaft machining Bolt Screws Fasteners Material Metal Products Manufacturer Casting Stainless steel processing 

  Read more

• 

  Polycrystalline diamond PCD surface polishing technology

  Large area PCD articles are polished by conventional mechanical polishing. The grinding wheel will first contact the convex portion which appears due to stress deformation, resulting in defects such as long polishing time and local thicknes....

  TAG: Traitement de surface Galvanoplastie Anodisation Traitement CN Traitement de tour Tournant Boulon Matériel Fabricant de produits métalliques Produits de pièces métalliques 

  Read more

• 

  Turning technology and tool selection for superhard material HRC45\HRC58~68

  Ultra-hard turning is defined as the machining process for turning workpieces with high hardness materials above HRC45. Generally, the hardness of the workpiece material can reach the range of HRC 58-68, and the material of the cutting tool ....

  TAG: CNC machining Lathe processing Turning Milling machining Shaft machining Bolt Screws Fasteners Material Metal Products Manufacturer Casting Stainless steel processing 

  Read more