News

• 

  Lathe Turning Parts Set Groove

  Set the groove on the part. First, in order to facilitate the subsequent processing, such as lathe turning thread undercut, grinding over-traveling groove, etc.; The second is to ensure the accuracy of the axial positioning of the parts duri....

  TAG: CNC machining Lathe processing Turning Milling machining Material Metal Products Manufacturer Casting Stainless steel processing Rapid prototype Aluminum products 

  Read more

• 

  How stainless steel Parts tapping?

  Stainless steel parts tapping is much more difficult than tapping on common steel. Frequently, due to the large torque, the tap is “killed” in the screw hole, the tooth is broken or broken, the surface of the thread is not smooth, the groove is gr....

  TAG: Stainless steel processing Milling machining NC processing Lathe processing Turning Shaft machining Material Metal Products Manufacturer CNC machining 

  Read more

• 

  8 Elements Affecting Casting Aluminum Alloy

  The eight elements that affect the properties of casting aluminium alloys are as follows: Metal elements such as vanadium, calcium, lead, tin, bismuth, antimony, beryllium and sodium. Due to the different use of finished aluminium coil, the....

  TAG: CNC machining Lathe processing Turning Milling machining Material Metal Products Manufacturer Casting Stainless steel processing Rapid prototype Aluminum products 

  Read more

• 

  Metal Stamping Parts Mold Design And Production

  Chapter One Parts Introduction Parts analysis description 1. Parts shape and general requirements As shown in Figure 1-1, the material is stainless steel, the material thickness is 0.5mm, and the dimensional accuracy of the workpiece must m....

  TAG: Metal stamping Aluminum products Stainless steel processing Stamping die Mold manufacturer Metal Products Manufacturer Metal parts products 

  Read more

• 

  45 Steel Parts CNC Machining Design

  In this paper, through the analysis of a simple base part structure designed by ourselves, and programming, drilling, milling and other numerical control machining, it can better meet the actual precision requirements and improve the proces....

  TAG: NC processing Lathe processing Turning Milling machining Material Metal Products Manufacturer Programming CNC equipment 

  Read more

• 

  The Method Of Turning Elongate Shaft

  1.Turning slender shaft geometry accuracy and surface quality requirements are high. Conventional processing methods are used to clamp the workpiece between the main shaft and the tailstock. There is no flexibility at both ends. Under the influence of....

  TAG: Lathe processing Turning Milling machining Shaft machining Bolt Screws Fasteners CNC machining Stainless steel processing 

  Read more

• 

  Machining Technology of Precision Stainless Steel Nozzle Parts

  With the rapid development of aerospace, hydraulic, communications, micro-electronics, medical equipment and other industries. The Turning-Milling composite processing of many small precision composite parts with high precision, multi-batch....

  TAG: Stainless steel processing CNC machining Lathe processing Turning Milling machining Shaft machining Bolt Fasteners Material Metal Products Manufacturer CNC equipment 

  Read more

• 

  China Precision Casting Parts Manufacturer

  Precision casting is a special casting. Parts obtained by this method generally do not need to be machined. Such as investment casting, pressure casting and so on. One of the cast materials is: aluminum, stainless steel, titanium, titanium....

  TAG: CNC machining Lathe processing Turning Milling machining Shaft machining Material Metal Products Manufacturer Casting Stainless steel processing Rapid prototype China Rapid prototype 

  Read more

• 

  Continuous Stamping Design Of Metal Shell Parts

  The shape and size of the car door glass lifter housing parts. As shown in Figure 8.2.1, The material is 08 steel plate, plate thickness 1.5mm, mass production. Stamping production, it requires the preparation of a stamping process. 8.2.1 P....

  TAG: Stainless steel processing Aluminum products Metal Products Manufacturer Material Fasteners Mold manufacturer Stamping die Metal stamping 

  Read more

• 

  The Specifications of Wire Thread Inserts and 6 Advantages

  The wire threaded sleeve is a new type of threaded fastener, which is divided into two types: ordinary steel threaded screw sleeve and locking type steel threaded screw sleeve. It is a spring-like internal and external thread concentric body....

  TAG: Lathe processing Turning Milling machining Shaft machining Bolt Screws Fasteners Material Metal Products Manufacturer Titanium Processing Industrial automation 

  Read more