Lathe Processing Precision Complex Mechanical Parts Craft Card
Kang Ding Hardware |
|
Product number |
Part Number |
Part Name |
Number of pieces |
page 1 |
|||||
Low-Volume Manufacturing |
CG009 |
Complex Mechanical Parts |
1 item |
1 page in total |
|||||||
Part processing route |
|
Part specification |
|||||||||
workshop |
Process |
material |
Stainless iron Φ25 round bar |
||||||||
Treasury |
Blanking |
weight |
0.25kg |
||||||||
turner |
Deburring |
Blank material size: |
|||||||||
turner |
Rough turning |
Part technical requirements |
|||||||||
turner |
Finishing |
1. no burrs on the surface. |
|||||||||
turner |
Deburring |
||||||||||
Inspection room |
test |
||||||||||
No. |
Step name |
Device name |
Equipment model |
Tool number |
Tool name |
Process content |
Unit working hours |
Remarks |
|||
1 |
Alignment |
Automatic Lathe |
C6150/HK |
Three-jaw chuck, chuck, tool holder wrench, etc. |
Clamp the outer circle of the blank to extend 70, alignment and clamping. |
2min |
|||||
2 |
Turning end face, turning outer circle |
Adjustable wrench, 90° outer circular knife, 45° elbow cutter |
Turning end face, turning outer circleΦ24-0.039, thread outer circle, cone big head outer circle, to each length |
15min |
|||||||
3 |
Grooving |
Grooving tools |
Cut 4 (2) × Φ18 groove |
5min |
|||||||
4 |
Turning cone |
90° outer circular knife, 45° elbow cutter |
Turn the small drag to turning the cone, chamfer to deburring |
10min |
|||||||
5 |
Turning thread |
60° triangular thread cutter |
Turning M22×1.5 thread |
15min |
|||||||
6 |
drilling |
Twist drill Φ12 |
Drilling Φ12 hole |
10min |
|||||||
7 |
Cut off, turning R12 |
Cutting blades, R arcuate blade, rasp |
After cutting a U-turn: The copper pad is clamped to the outer circumference of Φ24-0.039 and aligned. Turn R12 to total length. file finishing |
10min |
|
||||||
8 |
test |
0~150mm vernier caliper, 0~25mm micrometer, ruler gauge M22 * 1.5, thread ring gauge, etc. |
5min |
Thread micrometer Three-needle stick |
|||||||
prepared by |
Zou gold hair |
Review |
Approve |
Sign |
Date of preparation |
2005.5 |