The utility model belongs to the technical field of camera equipment, and particularly relates to an aluminum alloy casing of a camera. There are many types of camera housings: Infrared waterproof camera housing, Conch camera housing, Surve....
Early diamond turning is mainly used for processing non-ferrous metals such as uranium membered oxygen or an aluminum alloy. Its main products are mirrors in various optical systems, such as the main mirror of radio telescopes, mirrors in L....
Unlike traditional concepts, it is not difficult to machine a quench-hardened workpiece to 5 m with the right machine tool and the right tool. Currently, tool suppliers have developed new tools that can withstand such machining conditions.....
For a titanium alloy part, a machining example of a deep groove with a width of 4 mm, a depth of 30 mm, and a length of 300 mm is processed (Fig. 1). Titanium alloy has a small elastic modulus and a small thermal conductivity coefficient, w....
In the process of machining titanium alloys, the following matters should be noted: 1. Due to the small elastic modulus of the titanium alloy, the clamping deformation and the deformation of the workpiece during processing are large, which....
The special properties of titanium alloys make it an increasingly popular field of application. High strength/weight ratio, excellent toughness and excellent corrosion resistance. Titanium alloys can be used to make medical implants, golf c....
Round insert milling cutters are suitable for milling titanium because their leading angles can be varied as appropriate. As long as these milling cutters are equipped with special inserts and the correct cutting parameters are applied, stab....
Material machinability is often measured by the cutting speed allowed for cutting a material with a certain tool durability. Usually T = 60 min, then vT is written as v60. If the v60 used for cutting carbon steel in cemented carbide turning....
A gasket is a mechanical seal between two objects that is typically used to protect the two objects from pressure, corrosion, and natural thermal expansion and contraction. Since the machined surface is not perfect, the gasket can be used t....
For the work of turning long shafts, the technical content is relatively high and difficult, especially for the turning of the slender shaft. In the clamping method, if a more common method is used, the processing difficulty is increased, a....