According to the overall technical idea of the curved surface of the blade, the milling of the curved surface of the blade should ensure that the geometrical position accuracy of the profile basically meets the design requirements. And it h....
High-speed cutting theory is increasingly accepted with the development of CNC machining equipment and high-speed machining tool technology; High-speed cutting is a comprehensive concept, which involves many different areas of technology, i....
The overall processing of the impeller is carried out by forming a hub and a blade on a blank, instead of using a process in which the blade is formed and welded to the hub. The processing scheme is as follows: 1. In order to improve the st....
The blade can basically be divided into three parts: the blade root, the leaf body and the leaf crown. The general square steel blades are single T or double T type blade roots, at least two blade root grooves, and the inlet and outlet side....
The electric motor is one of the commonly used equipments in the production of the enterprise, and the reliability and stability of its operation have a great influence on the normal operation of the production device. If the fault caused b....
The roll is a rolling tool that plastically deforms the metal. It is one of the important parts of the rolling mill. The pressure generated when the rolls roll can be used to roll the steel. Dynamic and static loads during rolling, wear and....
Since the bearings are widely used in three-phase asynchronous motors, there are not many failures of the three-phase asynchronous motors caused by the bearings. The fault of the motor bearing is mostly caused by overheating of the bearing.....
Turbine generator shaft processing technology includes many: Such as shaft forging inspection and cutting test, turning sequence processing technology, milling processing technology, boring sequence processing technology. Used in the rotary....
The camshaft is generally machined: It is divided into cam surface roughing, cam surface finishing, etc. The machining stage is divided during the machining process, and the machining process is analyzed. If there is a quality problem in the....
Curved Surface products are no stranger to modern life. From the beautiful and beautiful body of cars and yachts, to the exquisite outer casing of mobile phones and computer mice, curved surface products can be seen everywhere, and the patte....