I. Milling chip morphology in different media When milling titanium alloy at high speed under different media, due to the different friction and heat dissipation conditions between the tool and the chip, the shape and surface condition of t....
In China, the hole processing of the nozzle of the diesel engine oil pump is mostly EDM (Electrical Discharge) technology. Nowadays, the superiority of micro-hole processing of abrasive flow has been recognized. Micro-hole abrasive flow pro....
Material machinability is often measured by the cutting speed allowed for cutting a material with a certain tool durability. Usually T = 60 min, then vT is written as v60. If the v60 used for cutting carbon steel in cemented carbide turning....
By manually handling the burrs of the hydraulic valve, only the visible burrs on some surfaces can be removed, and the burrs cannot be completely removed. The best way to deburr the hydraulic valve cross hole now is thermal energy and elect....
A gasket is a mechanical seal between two objects that is typically used to protect the two objects from pressure, corrosion, and natural thermal expansion and contraction. Since the machined surface is not perfect, the gasket can be used t....
The blade curved surface finishing is to ensure that the curved surface roughness and waviness meet the design requirements. The material properties of the material are not changed, and the geometry and positional accuracy obtained by the m....