Machining part processing costs, The cost of machining costs is mainly composed of material costs and processing costs. The material cost is determined by the size of the part blank and the type of material, and the processing cost is determined by the equipment cost and labor cost.
The material cost is basically fixed, and the main difference in processing cost is in the processing company's different labor costs, transportation costs, consumption costs, and taxes. This is mainly talking about this one processing costs.

How to cost the machining price?
Detailed calculation method:
1. First of all, you can ask suppliers to provide preliminary process arrangements for key or complex parts, detailed to each process, the time-consuming of each process
2. The processing cost can be calculated according to the hourly cost of the equipment required for each process.
Specific equipment costs you can also ask suppliers to, for example,
Ordinary CNC machining is between ¥60~80 per hour (including tax) Milling machines, general vehicles and other general equipment are generally ¥30. . .

3, in accordance with the proportion of packaging and transportation, management costs, tooling, profit is the price, Of course, the price will have a lot to do with the annual purchase volume and the degree of difficulty of the part. There is a lot of price difference between single item and batch, which is also very easy to understand.

Machining Parts Processing Costs A rough calculation method:
1) Large in volume, Big weight
Difficulty general:
The ratio of processing costs to the raw material cost of the entire part is 1:1, which is inversely proportional to the purchase volume;
Difficult:
The ratio of processing costs to the raw material costs of the entire part is 1.2 to 1.5:1, which is inversely proportional to the purchase volume;

2)  For small and medium pieces
Difficulty general:
  The ratio of processing costs to the raw material cost of the entire part is approximately 2 to 3:1, which is inversely proportional to the purchase volume;
Difficult:
  The ratio of processing costs to the raw material cost of the entire part is approximately 5 to 10:1, which is inversely proportional to the purchase volume;

Since there is a lot of process flexibility in machining, that is, a part can have a variety of process arrangements, the cost is certainly not the same.
But when the supplier sometimes calculates the cost, it will give you a complicated process to increase the price, but actually the production will use other simple processes.
Therefore, the buyer's own understanding of the drawings and the knowledge of the parts processing, determine the accuracy of your estimated cost, so the procurement of mechanical parts requires a more comprehensive knowledge of machining.
If you want to machine a workpiece, the first is the material cost of the other party; Then some travel expenses for the purchase of the workpiece;
The main thing is your workpiece to be machined required processing time, General turning workmanship ¥10-30/hour, fitter probably ¥10-25/hour;

If there are no existing tools (such as tools, molds), the cost of the product also requires you to bear part or all of the tool fee; Finally, add up to the cost of processing you have to pay!
Material fees, machine depreciation, labor costs, management fees, taxes, etc. are basically required. Or the material fees, processing fees and taxes, as well as business costs, transportation costs, and budgeting require a thorough understanding of the market.

Process problems should include material fees, processing fees (which process prices are different), equipment depreciation expenses, workers' wages, management fees, taxes, etc.
It is mainly to determine the process first, namely the processing method, then calculate the working hours according to the craft, and determine the basic processing cost of the individual parts from the working hours, plus other expenses.
Process is a very complicated knowledge, a part using different processes, the price difference, In fact, the working hours of various types of work are not fixed, and will vary according to the difficulty of the workpiece, the size and performance of the equipment. Of course, the key is to see how much your volume, but in general it has a basic price, floating between the basic price.
1. Basic price of turning:￥ 20-40
Specific according to the actual situation, like small pieces, very simple processing, working hours is less than ¥ 20;
Sometimes even only ￥10, such as some large pulleys, the processing allowance is large, the boss only earns the money of cast iron powder is enough;
Sometimes if the workpiece is large, no one on the market generally can process it, and you can raise the price by two or three times. There is no way for others.
2. The basic price of grinding: ￥25-45
3. Milling basic price: ￥25-45
4 drilling basic price:¥ 15-35
5. PlanerBasic price:¥15-35
6. Wire cut base price: ¥30-40/sqm
7. Basic price of electric spark: ¥10-40, single piece generally press 50/piece (less than 1 hour)
8.NC basic price: 2-4 times more expensive than normal
9. Engraving: Generally single piece. ¥50-500/piece,
Of course, still a word. The specific product specific price, The above price is only for reference. If you have any experience, I hope you can speak it out and everyone can communicate together. 　　

No.	Device name	Model number	Processing range	Processing costs (¥/h)
1	lathe	C616	Φ320×750~1000	11
2	lathe	C6140	Φ400×1000~2000	13
3	lathe	J1-MAZAK	Φ460×1000~2000	15
4	lathe	C6150	Φ460×1000~2000	15
5	lathe	C630	Φ630×1000~2000	21
6	lathe	C650	Φ800×1500~5000	30
7	Vertical lathe	C5116A	Φ1600	28
8	Radial Drilling Machine	Z3050	Φ50~Φ63	16
9	Radial Drilling Machine	Z3080	Φ80	20
10	Vertical drilling machine	Z5140A	Φ32~Φ40	12
11	Horizontal boring machine	T68	1000×1000	26
12	Horizontal boring machine	T611	1000×1000	30
13	Vertical boring machine	T4163	630×1100	56
14	Horizontal boring machine	T6111A	1200×1200	36
15	universal circular grinding machine	M1420	Φ125~220×350~1000	15
16	universal circular grinding machine	M1432A	M9025×500~1000	19
17	universal circular grinding machine	M1432B	Φ315~320×1500~3000	26
18	universal circular grinding machine	M1331A	Φ315~320×1500~3000	26
19	universal circular grinding machine	M1450	Φ500×1500~2000	28
20	Precision universal circular grinding machine	MG1432	Φ320×1000~2000	32
21	internal grinding machine	MG1432	Φ12~Φ100×130	13
22	Surface Grinder	M7120	200×630~650	16
23	Surface Grinder	M7130	300×1000	21
24	Surface Grinder	M7150	500×2000	40
25	guideway grinder	M50100	1000×6000	28
26	Spline grinding machine	M8612A	Φ120×1800	28
27	Thread grinding machine	Y7520W	Φ200×500	20
28	Gear grinding machine	Y4632A	Φ320×6M	30
29	Universal Tool Grinding Machine	M5MC	Φ200×500	13
30	Universal Tool Grinding Machine	MW6020	Φ200×500	13
31	Universal Tool Grinding Machine	M9025	Φ200×650	16
32	Universal Tool Grinding Machine	M6025H	Φ250×650	16
33	Universal Tool Grinding Machine	M6425	Φ250×650	16
34	Broach grinder	M6110D	Φ100×1500~1700	16
35	Gear hobbing machine	YM3150E	Φ500×8M	22
36	Rod rack	YM5150B	Φ500×8M	18
37	Vertical milling machine	X5030A	Φ300×1120	16
38	Vertical milling machine	X52K	Φ320×1250	18
39	Vertical milling machine	XA5032	Φ320×1250	18
40	Horizontal milling machine	X63W	Φ400×1600	24
41	Sleeper milling machine	XS5646/1	Φ425×2000	28
42	Shaping machine	B665	650×800	14
43	Shaping machine	B650	650×800	11
44	Hydraulic planer	BY60100	900~1000	16
45	Hydraulic planer	B690	900~1000	16
46	frame planer	B2016A	900~1000	28
47	frame planer	B2020A	2000~6000	50
48	Rod bed	B5032	200~320	12
49	Broaching machine	L6140	40T	15
50	Line fitter		Φ200×650	15
51	Assembly fitter		Φ200×650	30
52	Mold fitter		Φ200×650	30
53	Machining Center		Φ200×650	80
54	Wire cutting		Φ200×650	9
55	Welding knife		Φ200×650	7

Due to different regions, different time, different manufacturers, different requirements, different suppliers, different quantities, there are many different, the price is also very different, there is no certain standard.
However, according to the billing of processing time, one reference is given as follows (where the figures are for reference only, and the difference between regions and time is really great):
  This data does not include electricity processing yet. such as wire cutting, generally based on the processing area to billing. "Regarding Charges for General Mechanical Parts"
One. By working hour rate method:
Z25 Drilling Machine, CA6140 Lathe, Planer, Inserting Machine, Sawing Machine With a charge of ¥15/h.
  Vertical, horizontal milling, wire cutting, large lathes, gantry milling with ¥20/h.
General fitter maintenance costs ¥15/h.
The chronograph unit starts from the beginning of processing to the end of processing acceptance.

Second, the machining price is based on parts, quantity, accuracy requirements charging methods: