Titanium - Gliders, Bike Mounts
Customized titanium alloy frames for gliders and bicycles for export. Titanium - Glider Mount Titanium frame for bicycle Titanium Brackets for Bicycles....
Titanium Technology
Titanium Technology
-
-
Deformation of chips during milling of titanium alloy
I. Milling chip morphology in different media When milling titanium alloy at high speed under different media, due to the different friction and heat dissipation conditions between the tool and the chip, the shape and surface condition of t.... -
Deformation compensation for milling curved blade parts
The detailed distribution information of surface machining deformation error of blade parts was obtained by the theory of material mechanics analysis, finite element analysis or measurement data analysis. Based on this, the original NC prog.... -
Effect of Radial Cutting Depth Change of Titanium Alloy on High Speed Milling Force
The machined titanium tool is made of Walter carbide insert end mill, grade ZDGT150416R-K85 WMG40, uncoated, diameter 25mm, corner radius r=1.6mm, two teeth, see Figure 1. The milling force test of high-speed milling of ferroalloy TC4 was c.... -
Titanium alloy milling deep groove processing
For a titanium alloy part, a machining example of a deep groove with a width of 4 mm, a depth of 30 mm, and a length of 300 mm is processed (Fig. 1). Titanium alloy has a small elastic modulus and a small thermal conductivity coefficient, w.... -
Matters needing attention in the machining process of titanium alloy
In the process of machining titanium alloys, the following matters should be noted: 1. Due to the small elastic modulus of the titanium alloy, the clamping deformation and the deformation of the workpiece during processing are large, which.... -
The latest turning technology for titanium parts
The special properties of titanium alloys make it an increasingly popular field of application. High strength/weight ratio, excellent toughness and excellent corrosion resistance. Titanium alloys can be used to make medical implants, golf c.... -
Suitable Conditions for Machining Titanium Parts
Round insert milling cutters are suitable for milling titanium because their leading angles can be varied as appropriate. As long as these milling cutters are equipped with special inserts and the correct cutting parameters are applied, stab.... -
Causes of poor machinability of titanium alloy
Material machinability is often measured by the cutting speed allowed for cutting a material with a certain tool durability. Usually T = 60 min, then vT is written as v60. If the v60 used for cutting carbon steel in cemented carbide turning.... -
Milling of curved surface of titanium alloy blade by 5-axis machining center
According to the overall technical idea of the curved surface of the blade, the milling of the curved surface of the blade should ensure that the geometrical position accuracy of the profile basically meets the design requirements. And it h....
