By manually handling the burrs of the hydraulic valve, only the visible burrs on some surfaces can be removed, and the burrs cannot be completely removed. The best way to deburr the hydraulic valve cross hole now is thermal energy and elect....
Since the cast iron cylinder liner is pre-cast in the blank. The rough and fine boring of cylinder bore is concentrated in the same process with some hole series processing, which makes it the bottleneck of the processing of all aluminum eng....
The processing of the valve block of the automatic transmission valve body of the automobile is the most demanding position in the entire machining process of the box hole. It is used in the processing of aluminum alloy valve bodies with a....
Due to the complicated structure of the engine and the high technical content, the manufacture of its components has always been the focus of attention. When the tappet hole of cylinder head is reamed, the short service life of the cutter ha....
A gasket is a mechanical seal between two objects that is typically used to protect the two objects from pressure, corrosion, and natural thermal expansion and contraction. Since the machined surface is not perfect, the gasket can be used t....
Eine Dichtung ist eine Gleitringdichtung zwischen zwei Objekten, die normalerweise zum Schutz der beiden Objekte vor Druck, Korrosion und natrlicher Wrmeausdehnung und -kontraktion verwendet wird. Da die bearbeitete Oberflche nicht perfekt....
Composite machining is the implementation of several different machining processes on one machine that is an advanced manufacturing technology. Turning and milling combined machining is the most difficult composite machining. It is equivale....
In the towed concrete pump truck, there is a typical large diameter thin walled part - the intermediate sleeve. The inner hole has a diameter of 202 mm, an outer diameter of 212 mm, and a wall thickness of only 5 mm. Moreover, the positiona....
En el camin bomba de concreto remolcado, hay una parte tpica de pared delgada de gran dimetro: el manguito intermedio. El orificio interno tiene un dimetro de 202 mm, un dimetro externo de 212 mm y un espesor de pared de solo 5 mm. Adems, l....
The structural features of typical aircraft parts are thin-walled structures with complex shapes. The shape has a large change in the bevel angle, and the shape is mostly a hyperboloid, which requires precise forming. In order to reduce the....