Design and manufacture precision ball screw nut seat
- PRODUCT DETAIL
Curved tube
(SBN, BNF, BNT, BNFN, BIF and BTK models) These models are searched.
Circulating guide type (HBN type)
These models are the most typical nuts that allow the ball to circulate by using a bend.
The steel ball is drawn from the groove of the screw shaft into the elbow, and then returned to the groove for infinite cyclic motion.
Circulator form
(DK, DKN, DIK, JPF and DIR types)
These models are the smallest nuts that change the direction of travel of the steel ball through the circulator and return to the original position beyond the outer diameter of the screw shaft for infinite cyclic motion.
End cap form
(SBK, SDA, SBKH, WHF, BLK, WGF, BLW, WTF, CNF and BLR types)
These models are the most suitable nuts for high speed feed. The steel ball is drawn into the through hole of the nut from the groove of the screw shaft by the end cover, and returns to the groove through the through hole to perform an infinite circular motion.
(SBN, BNF, BNT, BNFN, BIF and BTK models) These models are searched.
Circulating guide type (HBN type)
These models are the most typical nuts that allow the ball to circulate by using a bend.
The steel ball is drawn from the groove of the screw shaft into the elbow, and then returned to the groove for infinite cyclic motion.
Circulator form
(DK, DKN, DIK, JPF and DIR types)
These models are the smallest nuts that change the direction of travel of the steel ball through the circulator and return to the original position beyond the outer diameter of the screw shaft for infinite cyclic motion.
End cap form
(SBK, SDA, SBKH, WHF, BLK, WGF, BLW, WTF, CNF and BLR types)
These models are the most suitable nuts for high speed feed. The steel ball is drawn into the through hole of the nut from the groove of the screw shaft by the end cover, and returns to the groove through the through hole to perform an infinite circular motion.
| MCA |
 |
- For the outer wheel separation type and the inner wheel rotation. - For use where it is necessary to rotate the inner wheel. |
| MCB |
 |
