Custom machining precision support rail unit
- PRODUCT DETAIL
The function of the linear guide motion is to support and guide the moving parts to make a reciprocating linear motion in a given direction. Depending on the nature of the friction, linear motion guides can be classified into sliding friction guides, rolling friction guides, elastic friction guides, and fluid friction guides.
Linear guides are precision parts and require considerable care when in use. Even if a high-performance linear guide is used, if it is used improperly, the expected performance will not be achieved, and the linear guide will be easily damaged. Therefore, the following matters should be noted when using linear guides:
Prevent corrosion
When taking the linear guide directly by hand, wash off the sweat on your hands and apply high quality mineral oil before handling. Pay special attention to rust prevention during the rainy season and summer.
Keep the environment clean
Keep the linear guides and their surroundings clean. Even tiny dust that is invisible to the naked eye enters the rail, which increases the wear, vibration and noise of the rail.
Installation should be careful
Linear guides should be carefully used when installing. Strong stamping is not allowed. It is not allowed to hit the rail directly with a hammer. It is not allowed to transmit pressure through the rolling elements.
The installation tool should be suitable
Linear guides use special tools with appropriate and accurate installation tools, and try to avoid the use of cloth and short fibers.
Support rail unit use note
Linear guides are precision parts and require considerable care when in use. Even if a high-performance linear guide is used, if it is used improperly, the expected performance will not be achieved, and the linear guide will be easily damaged. Therefore, the following matters should be noted when using linear guides:
Prevent corrosion
When taking the linear guide directly by hand, wash off the sweat on your hands and apply high quality mineral oil before handling. Pay special attention to rust prevention during the rainy season and summer.
Keep the environment clean
Keep the linear guides and their surroundings clean. Even tiny dust that is invisible to the naked eye enters the rail, which increases the wear, vibration and noise of the rail.
Installation should be careful
Linear guides should be carefully used when installing. Strong stamping is not allowed. It is not allowed to hit the rail directly with a hammer. It is not allowed to transmit pressure through the rolling elements.
The installation tool should be suitable
Linear guides use special tools with appropriate and accurate installation tools, and try to avoid the use of cloth and short fibers.
|
SBR |
|
- For the outer wheel separation type and the inner wheel rotation. - For use where it is necessary to rotate the inner wheel. |
|
SBR-UU |
|
|
|
SF(C)/PSF |
|
|
|
SH |
|
|
|
SHF |
|
|
|
TBR |
|
