Company news

• 

  Comparison And Difference Between CNC Machining Center And CNC Engraving Machine

  Guide The machining center is a CNC milling machine, also known as a CNC machining center, while the engraving machine is generally considered to be a CNC milling machine that uses small tools, high power and high speed spindle motors. But i....

  TAG: CNC equipment CNC machining NC processing Lathe processing Turning Milling machining Shaft machining 

  Read more

• 

  Safe And Fast Titanium alloy Machining Using Carbide Tools

  The situation in the aviation industry is slightly different from other industries. Weight plays an important role, and every gram cannot be ignored. It is the weight of the product that determines its profitability, not the price of the par....

  TAG: CNC machining NC processing Lathe processing Turning Milling machining Shaft machining Bolt Titanium Alloys Titanium Processing Material Metal Products Manufacturer 

  Read more

• 

  Design Analysis of Progressive Stamping Die for Q235 Carbon Structural Steel Triangle Gasket

  1. Process analysis of blanking parts Workpiece name: triangular gasket stamping , progressive stamping die Workpiece sketch: as shown in Figure 1-1 Production batch: annual output of 1 million pieces for general batch Material: Q235 Materi....

  TAG: Sheet metal Aluminum products Stainless steel processing Finishing Stamping die Mold manufacturer Metal stamping 

  Read more

• 

  Stamping Compound Die Design And Production

  Comparison of Positive compound die and Flip chip compound die : Positive compound die suitable for punching relatively soft, thin sheet material, require a higher flatness blanking member may also be made smaller hole punching margins blan....

  TAG: Mold manufacturer Metal stamping Stamping die Aluminum products Stainless steel processing Programming Material 

  Read more

• 

  TC4 Titanium Alloy Parts Machining And Welding Process Notes

  Common welding methods for titanium and titanium alloys include: argon arc welding, submerged arc welding, vacuum electron beam welding, and the like. Tungsten argon arc welding is used for thicknesses below 3 mm, and argon arc welding is pe....

  TAG: Titanium Alloys Titanium Processing Turning Milling machining Shaft machining CNC machining 

  Read more

• 

  Introduction to the automatic turning process of slender shaft

  What is the elongated shaft? An axial type workpiece having a ratio of the length L to the diameter d of the workpiece greater than 25 (i.e., the long neck ratio L/d gt; 25) is referred to as an elongated shaft. The shape of the slender shaf....

  TAG: Milling machining Shaft machining Turning Lathe processing Bolt Screws Fasteners Metal parts products Programming 

  Read more

• 

  Structural Composition Of precision CNC Machine Tools

  CNC machine tools integrate machine tools, computers, motors and drag, motion control, detection and other technologies into one automation equipment. The basic components of CNC machine tools include control media, numerical control devices....

  TAG: CNC equipment NC processing Lathe processing Turning Milling machining CNC machining Programming 

  Read more

• 

  The Front Support Member Press-Punching Process Design Of Motorcycle Side Cover (Flexural Modulus)

  Figure 12-1 shows: Schematic diagram of the front support part sof the motorcycle side cover, Material Q215 steel, Thickness 1.5mm. The annual production capacity is 500,000 pieces, and the stamping process plan is required.....

  TAG: Aluminum products Metal stamping Stainless steel processing Stamping die Mold manufacturer Programming Metal parts products 

  Read more

• 

  Stamping Material Application Analysis - SPCC, SECC, SPTE

  SPCC (cold rolled steel): Cold rolled steel, hot rolled coil after acid pickling product is at ambient temperature workshop cold rolling until the thickness of 0.30-3.20mm, manufactured by electrolytic cleaning, annealing and quenching proce....

  TAG: Material Metal Products Manufacturer Metal parts products Metal stamping Aluminum products Stamping die Mold manufacturer 

  Read more

• 

  Conventional stamping Parts Material Analysis --Nickel Silver Alloy, Phosphor bronze, Beryllium Coppe

  (Nickel Copper Alloy) Nickel Silver Alloy Nickel Silver Alloy: Refers to the general term for the alloy consisting of 50-70% copper and 15~35% nickel. Its material has excellent toughness, and its bright silver color and stability are su....

  TAG: Material Metal Products Manufacturer Metal parts products Metal stamping Aluminum products Stamping die Mold manufacturer 

  Read more