Sheet Metal Forming Processing
- PRODUCT DETAIL
Selection of materials
The commonly used materials for sheet metal processing include cold-rolled sheet (SPCC), hot-rolled sheet (SHCC), galvanized sheet (SECC, SGCC), copper (CU) brass, red copper, beryllium copper, aluminum (6061, 5052) 1010, 1060, 6063, hard aluminum, etc., stainless steel (mirror, brushed surface, matte surface). According to the different effects of the products, the selection of materials is different. Generally, the use and cost of the products must be considered.
1. Cold-rolled plate SPCC, mainly used for electroplating and baking paint parts, low cost, easy molding, material thickness ≤ 3.2mm.
2. Hot-rolled plate SHCC, material T≥3.0mm, also used for electroplating, baking paint, low cost, but, it is difficult to form and it is mainly used for flat pieces.
3. Galvanized sheet SECC, SGCC. SECC electrolysis board is divided into N material and P material. N material is not used for surface treatment and the cost is high. P material is used for spraying parts.
4. Copper; mainly conductive materials, the surface treatment is nickel, chrome, or no treatment, high cost.
5. Aluminum plate; general use of surface chromate (J11-A), oxidation (conductive oxidation, chemical oxidation), high cost, silver plating, nickel plating.
6. Aluminium profiles; pieces of material with complex cross-section structures are used extensively in various insert boxes. Surface treatment with aluminum plate.
7. Stainless steel; mainly used without any surface treatment products, high cost.
The commonly used materials for sheet metal processing include cold-rolled sheet (SPCC), hot-rolled sheet (SHCC), galvanized sheet (SECC, SGCC), copper (CU) brass, red copper, beryllium copper, aluminum (6061, 5052) 1010, 1060, 6063, hard aluminum, etc., stainless steel (mirror, brushed surface, matte surface). According to the different effects of the products, the selection of materials is different. Generally, the use and cost of the products must be considered.
1. Cold-rolled plate SPCC, mainly used for electroplating and baking paint parts, low cost, easy molding, material thickness ≤ 3.2mm.
2. Hot-rolled plate SHCC, material T≥3.0mm, also used for electroplating, baking paint, low cost, but, it is difficult to form and it is mainly used for flat pieces.
3. Galvanized sheet SECC, SGCC. SECC electrolysis board is divided into N material and P material. N material is not used for surface treatment and the cost is high. P material is used for spraying parts.
4. Copper; mainly conductive materials, the surface treatment is nickel, chrome, or no treatment, high cost.
5. Aluminum plate; general use of surface chromate (J11-A), oxidation (conductive oxidation, chemical oxidation), high cost, silver plating, nickel plating.
6. Aluminium profiles; pieces of material with complex cross-section structures are used extensively in various insert boxes. Surface treatment with aluminum plate.
7. Stainless steel; mainly used without any surface treatment products, high cost.
 
Power Supply Chassis Control Box Sheet Metal Forming Aluminum control cabinet sheet metal forming
|
  Compact Advanced Passenger Security System Sheet Metal Parts Large shaped pieces bending forming |
  Display case sheet metal molding ATM machine cover sheet metal molding |
  Drinking fountain parts sheet metal processing New energy charging pile sheet metal processing |
  Automatic card inspection machine shell sheet metal processing Self-service ticket machine sheet metal parts |
PREV：Sheet Metal Processing Products
NEXT：NONE
NEXT：NONE
