News

• 

  Drawing Die Material Selection And Heat Treatment Process

  Drawing Die Material Selection And Heat Treatment Process The reason for the failure of the deep drawing die is mainly adhesion wear and abrasive wear, and it is mainly based on adhesive wear. Therefore, the selected mold material must have....

  TAG: Stainless steel processing Sheet metal Stamping die Mold manufacturer Material Metal stamping 

  Read more

• 

  Shaft Parts Process Plan Analysis

  Figure 1-1 (a) parts drawing (b) Analysis of Parts Drawings The surface of the part is composed of a cylinder, a straight arc, an inverse arc, a cone, a groove, a thread, a hole, and the like. The dimensioning is complete. The blank is 45#....

  TAG: Shaft machining Bolt Screws Fasteners Lathe processing Turning Material 

  Read more

• 

  UG Software Platform Introduction

  The Unigrahics NX/CAM CNC machining module consists of the following important components: 3D modeling, tool path design, tool path edit modification, machining simulation, post processing, CNC programming templates, cutting parameter librar....

  TAG: Programming CNC machining Metal stamping Turning Milling machining Shaft machining bolt 

  Read more

• 

  UG Crankshaft CNC Machining

  Summary The crankshaft is the central part of the internal combustion engine and is the heart of the engine. If its function cannot be accurately performed, the horsepower of the engine cannot be normally used. The relative angles of the cr....

  TAG: Shaft machining Fasteners Programming CNC machining CNC Prototyping 

  Read more

• 

  Stainless Steel Features and Applications

  Stainless steel anti-corrosion elements All metals react with oxygen in the atmosphere to form an oxide film on the surface. Unfortunately, the iron oxide formed on ordinary carbon steel continues to oxidize, causing the rust to continuously....

  TAG: CNC machining Metal Products Manufacturer Turning Stainless steel processing Metal stamping Material 

  Read more

• 

  4 Kinds Of CNC Machining Technology Ingenious Utilized

  One, bottom slitter way 1. Outer protruding parts processing As shown in Fig. 1, when machining outside open outer protruding, the plane profile processing method can be used for processing. Generally, the tool is selected from the point P1....

  TAG: CNC equipment CNC machining CNC Prototyping Aluminum products Metal Products Manufacturer Programming 

  Read more

• 

  CNC Machining Where is The Way Out?

  A few days ago Kangding Engineering (the public number) wrote a CNC machining cheap orders, which hurt himself, injured his counterparts and pitted customers! After I read it, I feel quite touched, and the industry has developed into the pre....

  TAG: Rapid prototype CNC machining CNC Prototyping Aluminum products Metal parts products 

  Read more

• 

  16 Kinds Of Metal Stamping Drawing Processing Methods,Aluminum products,Stainless steel processing

  The use of stamping equipment for the products stretch forming process, Including: Stretch machining, Re-stretching , Reverse drawing and Thinning stretch machining. Stretch machining : Using a pressure plate device, using punch pressure, Th....

  TAG: Stamping die Mold manufacturer Metal stamping 

  Read more

• 

  Several Turning Bars Commonly Used in Automatic Lathes

  Material name Material number Instructions for use (CNS/JIS) (AISI/SAE) Quick cut stainless steel SUS303F Good rust resistance and machinability, suitable for general parts (JIS G4318) SUS303CU 303 Series Adds (CU) this quick-cutting ingred....

  TAG: Turning Shaft machining Bolt Screws Fasteners Milling machining 

  Read more

• 

  Commonly Used Fasteners Used Materials

  First, the standard parts on the market today mainly include: Carbon steel (including Easy iron and steel), Stainless steel (including free cutting stainless steel), Copper (including Fast cutting copper). (a) Carbon steel. We distinguish l....

  TAG: Shaft machining Bolt Screws Fasteners Lathe processing Turning Material 

  Read more