Titanium tapping is the most difficult process in titanium alloy machining, especially for small threads. This difficulty is mainly manifested in the large total torque of tapping, which is about twice that of 45 steel; The tap teeth are wor....
Titanium and titanium alloys are not only important structural materials for the manufacture of spacecraft such as airplanes and rockets. And it is increasingly used in mechanical engineering, marine engineering, bioengineering and chemical....
The machining efficiency of complex titanium alloy aerospace components and the overall performance of the workpiece. Including common products: titanium alloy complex cavity, titanium alloy deep groove processing, titanium alloy rotation, s....
The spray form of the stainless steel hollow cone nozzle is a conical hollow ring shape, and the atomization particle size is small and is not easy to block; The spray angle is generally 40 to 90 degrees, and the hollow cone nozzle has no fl....
Analysis of Milling Process Characteristics of Titanium Alloy Due to the slow heat dissipation in the milling area, it is not conducive to heat balance. During the cutting process, the heat dissipation and cooling effects are very poor, and....
TC4 titanium alloy machining parts characteristics TC4 has the following special physicochemical properties: 1. The thermal conductivity of TC4 is low, which makes the workpiece and tool temperature higher during the machining process; 2. TC....
TC4 titanium alloy processing is very difficult. The comprehensive process of titanium and titanium alloy is very different from steel, aluminum alloy and many heavy metals in terms of crystal structure, physical properties and chemical prop....
Summary: In this paper, the difficulties and solutions for deep hole machining of TA10 titanium alloy parts are analyzed. The machining test was carried out, the tool angle was optimized, and the wear mechanism of the machining tool was anal....
Titanium alloy TC4 is a medium-strength - type two-phase titanium alloy containing 6% stable element Al and 4% stable element V. TC4 parts have excellent corrosion resistance, high temperature resistance and high specific strength, and are t....
Through careful study of the drawings of high-precision titanium alloy parts, the processing plan and process parameters were determined. Using the existing ordinary lathe equipment, the processing of the parts was completed smoothly and com....