One, bottom slitter way 1. Outer protruding parts processing As shown in Fig. 1, when machining outside open outer protruding, the plane profile processing method can be used for processing. Generally, the tool is selected from the point P1....
When brown rust (spots) appear on the surface of stainless steel bearings, People are greatly surprised: Stainless steel bearings do not rust, and rust is not a stainless steel bearing. It may be a problem with steel. In fact, this is a one-....
Stainless steel anti-corrosion elements All metals react with oxygen in the atmosphere to form an oxide film on the surface. Unfortunately, the iron oxide formed on ordinary carbon steel continues to oxidize, causing the rust to continuously....
3.1 Reasonable selection of machine tools CNC machine tools are usually best suited for machining parts with the following characteristics: (1) Parts for multi-variety, low-volume production, or trial production of new products. (2) Parts w....
1. The characteristics of CNC machine tools CNC machine tools are a type of processing equipment that uses digital signals to control the movement of a machine tool and its machining process. The modern CNC machine tool is a typical process....
Hex nut is classified into I type, II type and thin type according to the nominal thickness. Nuts of class 8 or higher are type I and type II. The type I Hex nut is the most widely used, and the I nut is divided into A, B, and C grades. The....
UV paint Abbreviation for Ultraviolet Curing Paint, that is UV light curing paint, also called light-initiated paint, light-cured coating. It is applied to the surface of metal parts by automatic roller coating and shower coating. Under the....
With the development of todays society, sheet metal industry also will be developed rapidly, Now sheet metal involves all walks of life. For any sheet metal part, it has a certain processing process. The so-called process flow, to understand....
CNC standards are a trend in the development of manufacturing informatization. In the 50 years after the CNC lathe machining CNC technology was born, information exchange was based on the ISO 6983 standard. That is, using the G and M codes t....