The mold is an important process equipment. It plays an important role in industrial sectors such as consumer goods, electrical appliances, automobiles, and aircraft manufacturing. 75% of the rough machining of industrial products, 50% of t....
By manually handling the burrs of the hydraulic valve, only the visible burrs on some surfaces can be removed, and the burrs cannot be completely removed. The best way to deburr the hydraulic valve cross hole now is thermal energy and elect....
A pattern of herringbone shapes is formed on the air bearing. The resist thickness was approximately 10 microns, the scanning speed was maintained at 200 microns per second, and the laser exposure light power measured before the sample was 6....
The impeller of C02 turbine compressor was originally made of 35CrMoV low alloy steel. In the process of using, the blade inlet of stage 1 and 3 of impeller is corroded and eroded by C02 water mist, and can not be used after a short period o....
Titanium is characterized by its high corrosion resistance. Titanium has become one of the main anti-corrosion materials in chemical equipment. It is mainly used in distillation towers, reactors, pressure vessels, heat exchangers, filters, m....
Titanium tapping is the most difficult process in titanium alloy machining, especially for small threads. This difficulty is mainly manifested in the large total torque of tapping, which is about twice that of 45 steel; The tap teeth are wor....
The spray form of the stainless steel hollow cone nozzle is a conical hollow ring shape, and the atomization particle size is small and is not easy to block; The spray angle is generally 40 to 90 degrees, and the hollow cone nozzle has no fl....
TC4 titanium alloy machining parts characteristics TC4 has the following special physicochemical properties: 1. The thermal conductivity of TC4 is low, which makes the workpiece and tool temperature higher during the machining process; 2. TC....