TC4 titanium alloy processing is very difficult. The comprehensive process of titanium and titanium alloy is very different from steel, aluminum alloy and many heavy metals in terms of crystal structure, physical properties and chemical prop....
Titanium alloy TC4 is a medium-strength - type two-phase titanium alloy containing 6% stable element Al and 4% stable element V. TC4 parts have excellent corrosion resistance, high temperature resistance and high specific strength, and are t....
Based on the spiral milling technology, the spiral milling test of 19.05mm diameter hole was carried out on titanium alloy parts by orthogonal test and extreme difference analysis method. The effects of different cutting parameters on axial cuttin....
Helicopters are aircraft that rely entirely on huge rotors to provide lift and control. The manufacture of moving parts based on the hub is called the pearl of the crown of helicopter manufacturing. In order to overcome this problem, solve t....
WEDM processing objects: Ordinary metals, high hardness alloy materials, synthetic diamonds, semiconductor materials, conductive ceramics, ferrite materials, and the like. WEDM processing range: In addition to general precision machining. It....
The main factor affecting the machining accuracy and surface quality of aluminum alloy thin-walled cavity parts is that they are easily deformed during processing. Solve the deformation problem of aluminum alloy thin-walled cavity parts during process....
There are processes of turning smooth stop and inner circle of smooth stator core when machining motor base. In order to make the air gap of the motor even, the iron core is pressed into the motor seat. In general, the method of finishing tu....
The aluminum alloy profile is light and soft relative to the steel material, and the stamping is easily broken. And some aluminum alloy products also need subsequent surface processing, such as drawing, anodizing and so on. Aluminum profiles....
Guide: The bending process requires that the designed structure adhere to the bending deformation law: Minimum radius of curvature, springback, minimum side length of bending, bending process hole or process groove, hole margin, bending proc....
Guide: The criteria for easy tool withdrawal in part processing and design are as follows: After finishing the processing task of a processing surface, the cutting tool can leave the area conveniently, so as to avoid collision or damage of t....